GN 865Power Clamps

Power Clamps

Pneumatic

  • Icons/__logo__RoHS__.png
pdf Other documents
Power Clamps
Power Clamps

GN 865

Zurücksetzen
Katalog
Size
max. clamping moment
in Nm at 6 bar
FS in N
Clamping force
at r at 6 bar
FH Holding capacity at r
a
b -0.2
d1 h8
d2
d3 H8
d4
d5
Thread
h1
GN 865-20-BI-NC
20
60
1250
4000
10.5
10
28
M 5
7
4.2
M 5
16
GN 865-32-BI-NC
32
150
2220
6962
15.5
12
40
M 6
9
5
G 1/8
21
GN 865-40-BI-NC
40
300
3640
9139
18.5
16
50
M 8
11
6.8
G 1/8
26
GN 865-50-BI-NC
50
475
4900
12331
21.5
18
60
M 10
13
8.5
G 1/8
31
  • Icons/__logo__MISATI__.png

Type

  • Type BI: Clamping arm vertical

Steel C 45

Chemically nickel plated NC

Max. pressure 10 bar

The maximum clamping moment of the power clamps GN 865 is reached once the clamping arm is at the end of its stroke. For this reason the working stroke should be completed as closely as possible to the stroke end.

  • With anti-stick coating for protection against welding spray and corrosion
 

These pneumatically operated power clamps (Patent MISATI) are used for clamping, holding, gripping and positioning of work pieces in jigs and handling systems.

The salient points of these power clamps are:

  • the high clamping force
  • the small dimensions
  • the reduced air consumption
  • the light weight

The drawings shown here explain the functional principle of the dead point mechanism.

Pistons with diameters of 20, 32, 40 and 50 mm yield a clamping force of 60 Nm up to 475 Nm, which leads to clamping forces being much above those of competitors’ power clamps.

The power clamps have been designed and configured to achieve an extended life. Functional tests have proved that even after 20 million cycles they were still serviceable.

Further salient design points are:

  • The clamp is kinematically designed such that self-retention (holding force FH) is achieved in the clamped position (clamping force FS) after passing the dead point due to irreversibility.
  • The forward stroke sequence of the clamping arm is rapid but the ultimate clamping action is slow and as a result pneumatic damping is normally not required. Upon request, however, it can be supplied when big masses are moved.
  • The clamping mechanism is fitted with needle bearings which give optimum clamping forces and reduced wear.
  • The steel cylinder with the integrated clamping mechanism are in one unit. This leads to high stability for these small units with an extended range of applications. The placement of the air connection at the bottom end leads also to many other advantages.
  • The clamping mechanism of GN 864 is also shrouded to avoid the ingress of dirt and other objects which could interfere with the proper functioning of the clamps (such as welding operations!).
 
 
Verwandte Produkte
Sensor

GN 3380

Sensor für Pneumatikspanner / Pneumatikzylinder
Kraftspanner

GN 866

Kraftspanner Stahl, pneumatisch, zum zentrischen Spannen
Spannbacken-Rohlinge

GN 872

Spannbacken-Rohlinge für Kraftspanner GN 864 / GN 865 / GN 866, Stahl
Klemmhalter

GN 873

Klemmhalter für Kraftspanner GN 864 / GN 865 / GN 866
Näherungsschalter

GN-893.1

Näherungsschalter für Kraftspanner, induktiv Sensor
Näherungsschalter

GN-893.2

Näherungsschalter für Kraftspanner, induktiv Sensor
Näherungsschalter

GN-893.3

Näherungsschalter für Kraftspanner, induktiv Sensor
Näherungsschalter

GN-893.4

Näherungsschalter für Kraftspanner, induktiv Sensor