HCX.Oliepeilglazen

Schroeven van verzinkt staal, NBR pakkingring

Transparant technopolymeer

Technical datasheet

Schroeven van verzinkt staal, NBR pakkingring

HCX.

Schroeven van verzinkt staal, NBR pakkingring

HCX-SST

AISI 303 roestvrijstalen schroeven, FKM pakkingring

HCX-VT

SUPER-technopolymeer schroeven, NBR pakkingring

HCX.

Reset

Code	Omschrijving	f	d	A	B	C	L	e	m	r	d'_-0.2	f'_±0.2

11341	HCX.76-M10	76	M10	22	16	27	107	40	18	15.5	10.5	76
11349	HCX.127-M10	127	M10	23	18	31	161	80	23	17	10.5	127
11351	HCX.127-M12	127	M12	23	18	31	161	80	23	17	12.5	127
11361	HCX.254-M12	254	M12	21	18	35	291	203	26	18.5	12.5	254

# Maximum tightening torque.

Body

Transparent polyamide based (PA-T) technopolymer. Highly resistant to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naphtha, phosphoric esters.

Avoid contact with alcohol or detergents containing alcohol.

Packing rings

NBR: synthetic rubber O-Ring.

FKM: FKM type VITON^®*O-Ring.

Suggested roughness of the packing ring application surface Ra = 3 µm.

^{* Registered trademark by DuPont Dow Elastomers.}

Contrast screen

White lacquered aluminium. The housing, in the appropriate external rear slot, guarantees the best protection from direct contact with fluid.

It can be taken out from the inclined side, before assembly to allow the insertion of level lines or words.

Standard executions

HCX.: zinc-plated steel screws, nuts and washers, NBR packing ring.

HCX-SST: AISI 303 stainless steel screws, AISI 304 stainless steel nuts and washers, FKM packing ring.

HCX-VT: glass-fibre reinforced polyamide based (PA) SUPER-technopolymer screws, AISI 304 stainless steel nuts and washers, NBR packing ring.

Maximum continuous working temperature

90°C (with oil).

Features and performances

Ultrasound welding to guarantee a perfect seal.

Maximum fluid level visibility even from side positions.

Lens effect for a better visibility of the fluid level.

Thanks to the SUPER-technopolymer screws, HCX/VT column level indicator can be used in corrosion resistance applications where stainless steel is not necessary.

The special slotted head of the SUPER-technopolymer screws is especially designed to reach an optimum tightening of the packing rings by applying an adequate tightening torque (ELESA patent) thus avoiding unnecessary stress to the screws.

Technical data

In laboratory tests carried out with mineral oil type CB68 (according to ISO 3498) at 23°C for a limited period of time, the weld stood up to: 18 bar (HCX.76 e HCX.127) 12 bar (HCX.254).

Considering the SUPER-technopolymer screws, the maximum working pressure cannot be higher than 5 bar at 20°C and 2 bar at 90°C.

For use with other fluids and under different pressure and temperature conditions, please contact ELESA Technical Department.

In any case we suggest to verify the suitability of the product under the actual working conditions.

Special executions on request

Indicators with two red ball-shaped floats.

Indicators with cylindrical or step-shaped (NBR or FKM) packing rings (instead of OR) for mounting on reservoirs having rough surfaces or in any case not perfectly flat.

Accessories on request

When fitting is not possible from the inside of the reservoir and the walls are not thick enough, the screws can be used together with Fast Mounting Kit

Gerelateerde producten