GN 9190-PZijklemmen

met prismaklem

Staal, met spiraalexcenter hendel

Technical datasheet

Code	a Slot width	d₁	F_s in kN	b	d₂	d₃ min.	d₃ Max.	h₁	h₂	h₃	h₄	h₅

GN 9190-10-M8-P-R	10	M 8	3.5	32	8.4	4	26	20	8	40	30	12.6
GN 9190-12-M12-P-R	12*	M 12	7	48	12.5	4	26	38	16	62	63	-
GN 9190-14-M12-P-R	14	M 12	7	48	12.5	4	26	38	16	62	40	19.1

* Combination with GN 9190.3 not possible

Types

Type E: With serrated clamping jaw
Type P: With prism clamping jaw

Coding

Version R: Clamping by clockwise rotation
Version L: Clamping by anti-clockwise rotation

Clamping mechanisms

Steel

Case-hardened

Blackened

Ball knob DIN 319

Plastic, phenolic resin (PF)

Black, shiny finish

For slot width a = 10 / 14

T-Nut DIN 508

Socket cap screw ISO 4762

Steel

Property class 12.9

Blackened

For slot width a = 12

T-slot bolt DIN 787

Hex nut DIN 934

Steel, blackened

With side clamps GN 9190, workpieces are clamped with a pivoted clamping jaw. The clamping force acts laterally and from above to pull down on the workpiece and clamp it against fixed stops and the supporting surface.

The clamping stroke of the clamping jaw results from the swivel movement of the eccentrical cam lever. When the lever is released, the clamping jaw is returned by spring force. The low overall height of the side clamps allow full-surface machining of the workpiece.

Side clamps can be screwed in directly, e.g. in a mounting plate, or fastened to machine tables with T-slots. In addition, they can be mounted in any position perpendicular to the T-slot using the slotted support blocks GN 9190.3, which are available as accessory. In this case, the supplied screw must be replaced as per the table.

To ensure easy play and maximum clamping force, the tensioning mechanisms should be lightly greased.