TCC-AP-SClamps for hinged joints

Without teeth

Technopolymer

Technical datasheet

TCC-AP-S

Reset

Catalogue	Description	d	L	H	d₂	f	l₁	l₂	l₃	l₄	s	C# [Nm]

600305-C33	TCC-AP-18-S-C33	18	59	36	6.5	45	29.5	13	21	29	M6	5
600405-C33	TCC-AP-30-S-C33	30	88	54	8.5	67.5	45	20	28	42	M8	12

# Suggested torque for screw assembly.* Resistance to tube pull out** Resistance to tube rotation*** Resistance to joint rotation.

Clamp

Glass-fibre reinforced polyamide based (PA) technopolymer, RAL 9005 (C9) black colour or grey RAL 7040 (C33) colour, resistant to UV rays, matte finish.

Screws and nuts

Cylindrical-head screw with hexagon socket in AISI 304 stainless steel with anti-seizure treatment.

Self-locking nuts in AISI 304 stainless steel.

Supplied: two screws and two nuts for versions TCC-AP-E and TCC-AP-S, one screw and one nut for version TCC-AP-I

Standard executions

TCC-AP-E: external teeth.

TCC-AP-I: internal teeth.

TCC-AP-S: without teeth.

Features

Two clamps, one with external teeth and one with internal teeth or two without teeth, can be joined to create a hinged joint.

Joints comprising clamps with external/internal teeth (36 teeth) have a 10° adjustment angle.

Joints comprising clamps without teeth can be positioned at any angle.

Clamps for tubes with a diameter of 30 ± 0.2 mm.

For smaller diameter tubes, the hole reduction sleeve can be used TCC-A (to be ordered separately).

The 's' grub screws may be replaced by the kit TCC-KS.

Technical data

The resistance values shown in the table were measured during laboratory tests at ambient temperature with the screws tightened to the suggested torque 'C#'.