Filter
Group
Reset
Your query
Reset all
Material
Reset
Type of assembly
Reset
Threaded screw
Reset
Diameter
Reset
Threaded body
Reset
Diameter
Reset
Foot Diameter
Reset
Hole distance
Reset
Screw length
Reset
Hole
Reset
Tube dimension
Reset
Hole centre distance
Reset
Housing material
Reset
Threaded screw
Reset
Plunger diameter
Reset
Hole
Reset
Accessory
Reset
Modular system
Reset
GN 55.1
Raw Magnets
Disk-Shaped, with Bore or Countersunk
GN 55.2
Raw Magnets
Disk-Shaped, without Bore
GN 55.4
Raw Magnets
Block-Shaped
GN 50.45
Stainless Steel Retaining Magnets
Disk-Shaped, with Bore
GN 4490.2
Mounting Plates
for Mounting Blocks of Ball Catches GN 4490, Stainless Steel
GN 613.1
Mounting Tools
for Indexing Plungers GN 613 and Spring Bolts GN 313, Steel
GN 343.1
Levelling mounts
Foot, female thread
GN 801
Clamp mounts
for toggle clamps with forked clamping arm
GN 412.1
Mounting blocks
for indexing plungers / cam action indexing plungers
GN 197
Monitor mounts
Aluminum
GN 477
Clamp mountings
Aluminium
GN 478
Clamp mountings
Aluminium
PLRF+C
Side mount
for threaded cap, technopolymer up to 90°C
PLRB+C
Side mount
for bayonet cap, technopolymer up to 90°C
GN 713.1
Mounting Tools
for Side Thrust Pins GN 713
GN 715.1
Mounting Tools
for Side Thrust Pins GN 715 / GN 714
GN 3492
Mounting Blocks
Stainless Steel
GN 611.2
Mounting Tools
for Spring Plungers GN 616.2, Steel
GN 4490.1
Mounting Plates
for Ball Housings of Ball Catches GN 4490, Stainless Steel
GN 900.4
Mounting Plates
for Adjustable Slide Units GN 900, Aluminum
GN 139.3
Mounting plates
for hinges with safety switch GN 139.1 / GN 139.2, flat
GN 139.4
Mounting plates
for hinges with safety switch GN 139.1 / GN 139.2, angled
GN 928.1
Mounting Tools
for Shaft Clamping Units GN 928, Steel
GN 612.1
Mounting blocks
Steel / Stainless Steel, for indexing plungers / cam action indexing plungers
GN 474.1
Parallel Mounting Clamps
Aluminum
GN 476
T-Clamp mountings
Aluminium
GN 349
Mounts for levelling feet
GN 482
Swivel clamp mountings
Aluminium
GN 484
Attachment clamp mountings
Aluminium
FM Kit
Fast Mounting Kit
Steel and rubber
DVE
Rubber buffers mounts with flange
Rubber and steel or stainless steel
TCC-TB
Connecting clamps with mounting plate
Technopolymer
TSLA.
Side mounting top brackets
Technopolymer
TCC-TB-VD
Connecting clamps with mounting plate
Visually Detectable technopolymer
TSLB.
Side mounting top brackets
Technopolymer
TCC-AB
Connecting clamps with mounting base
Technopolymer
CFM-TR-G
Hinges for mounting on glass or panels
SUPER-Technopolymer
TCC-AB-VD
Connecting clamps with mounting base
Visually Detectable technopolymer
LV.FO
Levelling feet for ground mounting
Technopolymer base, steel or stainless steel stem
GN 473
Base plate clamp mountings
Aluminium
GN 474
Two-way clamp mountings
Aluminium
GN 873
Clamp mounting bracket accessories
for GN 864 / GN 865 / GN 866 pneumatic fastening clamps
GN 483
T-swivel clamp mountings
Aluminium
MT-ERX
Tool for mounting ERX adjustable handles
for an electric or pneumatic screwdriver, aluminium
GN 475
Twistable two-way clamp mountings
Aluminium
NEW
MT-CFNR
Tool for mounting CFNR spring hinges
Aluminium
NEW
PES
Elastomer springs
Load dampers
NEW
PEB
Elastomer hollow bar
Load dampers
GN 2279
Bull´s Eye Spirit Levels
Housing Aluminum, for Surface Mounting
M.1043-SCM-SST
Tubular handles with intermediate shank
Technopolymer and stainless steel
GN 20
Leveling Feet
Stainless Steel, EHEDG, 3-A and DGUV Certified, with and without Mounting Holes, Hygienic Design
GN 709.1
Clamping Pads
Steel, with Threaded Stud
GN 709.15
Stainless Steel-Clamping pads
with threaded stud
GN 25b
Quick Release Connectors
Steel, for Aluminum Profiles (b-Modular System), Asymmetrical or Symmetrical Mounting Stud
GN 111.2
Retaining Cables
Stainless Steel, with Key Rings or One Key Ring and One Mounting Tab / with Mounting Tabs or Loops, with Carabiner
GN 111.8
Stainless Steel Retaining Cables
AISI 316, with Key Rings or One Key Ring and One Mounting Tab / with Mounting Tabs
GN 2277
Bull´s Eye Spirit Levels
Housing Aluminum, with Mounting Flange for Mounting with Screws
GN 702
Stop Locks
Zinc Die Casting, with 4 Indexing Positions (4 x 90°)
GN 2282
Screw-On Spirit Levels
Housing Brass, for Mounting with Screws
GN 145
Flanged Connector Clamps
Aluminum / Stainless Steel, with 2 Mounting Holes
GN 145.1
Flanged Linear Actuator Connectors
Aluminum / Stainless Steel, with 2 Mounting Holes
GN 828
Bearing blocks
for Stainless Steel-Adjusting screws GN 827
ZCR
Racks
Technopolymer, pressure angle 20°
GN 2276
Cross spirit levels
for mounting with screws
GN 339
Levelling mount
Steel / Stainless Steel / Threaded stem, not adjustable
GN 753.2
Mounting Accessories
for Guide Rollers GN 753.1 / GN 753, Stainless Steel
GN 7430
Mounting Nuts
Brass / Stainless Steel for Hydraulic Components
NEW
DCE-GU
Mounting guides
for DCE tube clamps, steel
NEW
GN 62444.1
Mounting Nuts
Brass / Stainless Steel, Metric Thread / PG Thread
GN 727
Control Knobs with Adjustable Spindle
Body / Spindle Steel, Knob Aluminum
GN 425.9
Folding Handles
Stainless Steel
GN 565.5
Cabinet U-Handles
Stainless Steel
GN 728
Cabinet U-Handles
Aluminum Die Casting
GN 728.5
Cabinet U-Handles
Stainless Steel Precision Casting
GN 565.3
Cabinet U-Handles
Aluminum
GN 423
U-Handles
Handle Bar Aluminum / Handle Shanks Plastic, for 19“ Rack and Enclosure Layout
GN 328
Cabinet U-Handles
Aluminum
GN 328.5
Cabinet U-Handles
Stainless Steel Precision Casting
GN 426.5
Cabinet U-Handles
Stainless Steel
GN 426.6
Cabinet U-Handles
Stainless Steel
GN 565.4
Arch Handles
Aluminum
GN 565.9
Arch Handles
Stainless Steel
GN 669
Tubular Handles
Aluminum
GN 335
Oval Tubular Handles
Tube Aluminum, Handle Legs Zinc Die Casting, with Inclined Handle Profile
GN 7330
Gripping Trays
Zinc Die Casting, Screw-In Type
M.343-SOFT
Bridge handles
Technopolymer with 'Soft-touch' ergonomic inserts
GN 7332
Gripping Trays
Stainless Steel, Screw-In Type
M.643
Bridge handles
Technopolymer
M.1043
Tubular handles
Technopolymer, aluminium, stainless steel
BASE LS.A - LV.A - LV.F - LV.FO
Bases for levelling feet
Technopolymer
NEW
GN 474.2
Rail Mounting Clamps
Aluminum, Splittable, with Cross / Parallel Bore
NEW
DCE-NTG
Nuts for mounting guides
for DCE tube clamps, steel
EBP.
Bridge handles
Technopolymer
M.1043-SCM
Tubular handles with intermediate shank
Technopolymer and aluminium
BASE LS.A-VD - LV.A-VD - LV.F-VD
Bases for levelling feet
Visually Detectable technopolymer
BASE LV.A-ESD-C - LV.F-ESD-C
Bases for levelling feet
ESD conductive technopolymer
BASE LS.A-PP - LV.F-PP
Bases for levelling feet
Technopolymer (polypropylene)
GN 565.2
Inclined Cabinet U-Handles
Aluminum
GN 668
Flat Cabinet U-Handles
Aluminum
GN 333.1
Tubular Handles
Tube Aluminum, Legs Zinc Die Casting
GN 333
Tubular Handles
Tube Aluminum, Legs Zinc Die Casting
LV.F
Levelling elements for ground mounting
Technopolymer base, steel stem
LV.F-SST
Levelling elements for ground mounting
Technopolymer base, stainless steel stem
LV.F-SST-VD
Levelling feet for ground mounting
Visually Detectable technopolymer base, stainless steel stem
LV.F-ESD-C
Levelling feet for ground mounting
ESD conductive technopolymer base, steel stem
LV.F-SST-ESD-C
Levelling feet for ground mounting
ESD conductive technopolymer base, stainless steel stem
LV.F+SJF
Levelling feet for ground mounting
technopolymer base, SUPER-technopolymer joint
LV.F-STP
Levelling feet for ground mounting
Technopolymer base, SUPER-technopolymer stem
NEW
LV.F-STP-VD
Levelling feet for ground mounting
Technopolymer base, SUPER-technopolymer stem, Visually Detectable
LVQ.F-SST
Levelling elements for ground mounting
Technopolymer base, stainless steel stem
LVQ.F-SST-VD
Levelling feet for ground mounting
Visually Detectable technopolymer base, stainless steel stem
LV.F-PP-SST
Levelling feet for ground mounting
Polypropylene base, stainless steel stem
TCC-PBF
Mounting base for hinged joints
Technopolymer
LV.FO+SJF
Levelling feet for ground mounting
technopolymer base, SUPER-technopolymer joint
TCC-PB
Mounting base for hinged joints
Technopolymer
LV.FO-STP
Levelling feet for ground mounting
Technopolymer base, SUPER-technopolymer stem
LVQ.FO-SST
Levelling feet for ground mounting
Technopolymer base, stainless steel stem
LV.F-125-ACV
Levelling elements for ground mounting
Technopolymer base, steel stem
LV.F-125-APS
Levelling elements for ground mounting
Technopolymer base, steel stem
NEW
GN 476.2
Rail T-Mounting Clamps
Aluminum, Splittable
GN 2496
Stainless Steel Cam Rollers
for Stainless Steel Cam Roller Linear Guide Rails GN 2492
GN 559
Cabinet U-Handles
Aluminum
RDB
Toothed clamping elements
SUPER-technopolymer
TCC-AP-PBF
Hinged joint with mounting base and clamp
Technopolymer
TCC-AP-PB
Hinged joint with mounting base and clamp
Technopolymer
TCC-TP-PBF
Hinged joint with mounting base and clamp
Technopolymer
TCC-TP-PB
Hinged joint with mounting base and clamp
Technopolymer
GN 474.3
Parallel Mounting Clamps with Adjustable Spindle
Aluminum
GN 487
Swivel Ball Joint Mounting Clamps
Aluminum
GN 2283
Screw-On Spirit Levels
Housing Aluminum, for Mounting with Screws
GN 50.3
Retaining Magnets
Hard Ferrite / Neodymium-Iron-Boron, Housing Steel, with Threaded Stud
GN 123
Sheet metal punches
for mounting latches
GN 480
Flanged bolts
for clamp mountings
BOL-MF
Level bubbles
with mounting flange
GN 813
Heavy duty vertical acting toggle clamps
with vertical mounting base
GN 862
Pneumatic Toggle Clamps
with Vertical Mounting Base
GN 860
Pneumatic Toggle Clamps
with Horizontal Mounting Base
GN 711.2
Rulers
Aluminum, with Mounting Holes
GN 890
Pneumatic Push Toggle Clamps
with Horizontal Mounting Base
GN 612.10
Cam action indexing plungers
with flange for surface mounting
GN 480.3
Stainless Steel-Retaining rods
for clamp mountings, angled
GN 511
Clamping lever kits
adjustable, for clamp mountings
GN 511.1
Clamping kits
for swivel clamp mountings
MRH
Folding handles with recessed tray
for screw mounting, technopolymer
BOL-MB
Monodirectional screw-on levels
for screw mounting, technopolymer
BOL-PH
Level bubbles
for mounting in suitable housings
EPR.
Flush pull handles
for screw mounting, technopolymer
ERB.
Bi-directional flush pull handle
for screw mounting, technopolymer
GN 812
Vertical acting toggle clamps
with dual flanged mounting base
GN 711.3
Indicator Arrows
Aluminum, with Mounting Holes, for Rulers
SFN-RT
Breather caps
for mounting on rubber tubes, technopolymer
DVI
Vibration-damping elements
for wall mounting, rubber and steel
PPR
Support clamp for panels and electro-welded mesh
Mounting of the panel without drilling
GN 146.1
Flanged Linear Actuator Connectors
Aluminum, with 4 Mounting Holes
GN 146.13
Flanged Linear Actuator Connectors
Aluminum, with 2 Mounting Holes
GN 607.9
Double ring spanner
for mounting GN 607.2 / GN 607.3
GN 426.2
Cabinet U-Handles
Aluminum, Mounting from the Operator’s Side
GN 146.6
Flanged Connector Clamps
Stainless Steel, with 2 Mounting Holes
DVG
Vibration-damping elements
for wall or ceiling mounting, rubber and steel
GN 798.1
Revolving Handles
Stainless Steel, Mounting from the Back
GN 480.1
Retaining rods / Retaining tubes
Aluminium / Stainless Steel, for clamp mountings
GN 146.15
Flanged Linear Actuator Connectors
Stainless Steel, with 4 Mounting Holes
GN 146.16
Flanged Linear Actuator Connectors
Stainless Steel, with 2 Mounting Holes
ERB-CLEAN
Bi-directional flush pull handle
for screw mounting, technopolymer, easy cleaning
GN 666.5
Tubular Handles
Stainless Steel, Mounting from the Back
GN 810.1
Vertical acting toggle clamps
Steel / Stainless Steel, with vertical mounting base
GN 820.1
Horizontal Acting Toggle Clamps
Steel / Stainless Steel, with Vertical Mounting Base
GN 820.2
Horizontal acting toggle clamps
Steel / Stainless Steel, with vertical mounting base
GN 817.1
Indexing plungers
with flange for surface mounting, with or without rest position
GN 147
Flanged Connector Clamps
Aluminum, Split Assembly, with 4 Mounting Holes
GN 147.3
Flanged Connector Clamps
Aluminum, Split Assembly, with 6 Mounting Holes
GN 162
Base Plate Connector Clamps
Aluminum / Stainless Steel, with 4 Mounting Holes
GN 162.3
Base Plate Connector Clamps
Aluminum / Stainless Steel, with 2 Mounting Holes
NEW
GN 426.4
Cabinet U-Handles
Aluminum, Angled, Mounting from the Operator’s Side
GN 33
Leveling Feet
Stainless Steel, with Rubber Pad, with Mounting Flange
GN 724.2-ST
Spring Latches
Steel, with Chamfered Pin, with Flange for Surface Mounting
GN 724.3-ST
Spring Latches
Steel, with Chamfered Pin, with Flange for Surface Mounting
NEW
GN 509.8
Ball Transfer Units
Housing Steel Sheet Metal, with Mounting Flange
SFP-RT
Breather caps
for mounting on rubber tubes, with splash guard, technopolymer
GN 162.1
Base Plate Linear Actuator Connectors
Aluminum / Stainless Steel, with 4 Mounting Holes
GN 147.1
Flanged Linear Actuator Connectors
Aluminum, Split Assembly, with 4 Mounting Holes
GN 666.7
Tubular Handles
Stainless Steel, Mounting from Operator‘s Side
GN 784.1
Flanges
for mounting clamps with swivel ball joint GN 784
NEW
GN 823-F
Indexing Plungers
Stainless Steel, with Operating Lever, with Flange for Surface Mounting
GN 812.1
Toggle Clamps
Operating Lever Vertical, with Dual Flanged Mounting Base
GN 32
Leveling Feet
Steel Sheet Metal, with Rubber Pad, with Mounting Flange
GN 23
Leveling Feet
Stainless Steel, with Turned Base Plate, with Mounting Holes
NEW
GN 24
Leveling Feet
with Mounting Holes, Stainless Steel, Turned Base Plate
GN 724.2-NI
Spring Latches
Stainless Steel, with Chamfered Pin, with Flange for Surface Mounting
GN 724.3-NI
Spring Latches
Stainless Steel, with Chamfered Pin, with Flange for Surface Mounting
GN 798
Revolving Handles
Plastic / Aluminum, Spindle Steel, Mounting from the Back
GN 810.4
Toggle Clamps
Operating Lever Vertical, with Lock Mechanism, with Vertical Mounting Base
GN 724.5
Indexing Plungers
Steel / Stainless Steel, with Chamfered Pin, with Flange for Surface Mounting
NEW
GN 822.12
Mini Indexing Plungers
Stainless Steel, with Flange for Surface Mounting, with and without Rest Position
GN 724.6
Indexing Plungers
Steel / Stainless Steel, with Chamfered Pin, with Flange for Surface Mounting
GN 21
Leveling Feet
Stainless Steel, with Turned Base Plate, without Mounting Holes
NEW
GN 22
Leveling Feet
without Mounting Holes, Stainless Steel, Turned Base Plate
GN 479
Sensor holders
for clamp mountings with threaded holes GN 478 / GN 484
GN 479.1
Retaining plates
for clamp mountings with threaded holes GN 478 / GN 484
GN 810
Toggle Clamps
Steel / Stainless Steel, Operating Lever Vertical, with Horizontal Mounting Base
GN 820
Horizontal Acting Toggle Clamps
Steel / Stainless Steel, Operating Lever Horizontal, with Horizontal Mounting Base
GN 609.5
Distance Bushings
Stainless Steel, for Mounting Indexing Plungers / Cam Action Indexing Plungers
GN 722.3
Spring latches
Steel / Stainless Steel, with flange for surface mounting, parallel to the plunger pin
GN 798.4
Revolving Handles
Stainless Steel, Spindle Stainless Steel, Mounting from the Operator‘s Side
NEW
GN 820.5
Toggle Clamps
Steel / Stainless Steel, Operating Lever Horizontal, with Lock Mechanism, with Side Mounting
GN 722.2
Spring Latches
Steel / Stainless Steel, with Flange for Surface Mounting, Right-Angled to the Plunger Pin
GN 334
Oval Tubular Handles
Tube Aluminum, Handle Legs Zinc Die Casting, Mounting from the Back
GN 810.3
Toggle Clamps
Steel / Stainless Steel|-|,|-|Operating Lever Vertical, with Lock Mechanism, with Horizontal Mounting Base
GN 820.3
Toggle Clamps
Steel / Stainless Steel, Operating Lever Horizontal, with Lock Mechanism, with Horizontal Mounting Base
GN 810.10
Toggle Clamps
Steel, Operating Lever Vertical, with Horizontal Mounting Base, Heavy Duty Type „Longlife“
GN 810.11
Toggle Clamps
Steel, Operating Lever Vertical, with Vertical Mounting Base, Heavy Duty Type „Longlife“
GN 334.1
Oval Tubular Handles
Tube Aluminum, Handle Legs Zinc Die Casting, Mounting from the Operator‘s Side
GN 722.5
Indexing Plungers
Steel / Stainless Steel, with Flange for Surface Mounting, with or without Rest Position, with Pull Ring or Latch
GN 722.6
Indexing Plungers
Steel / Stainless Steel, with Flange for Surface Mounting, with or without Rest Position, with Pull Ring or Latch
GN 820.4
Toggle Clamps
Steel / Stainless Steel, Operating Lever Horizontal, with Lock Mechanism, with Vertical Mounting Base, with Extended Clamping Arm