114.7-16-110
GN 114.7 Locking Pins
Eta: 1-2 weeks All sizes and variants of GN 114.7
🔒 Prices, live stock & CAD downloads
Sign in to see your prices and stock, download CAD files and order directly online.
Sign in Request an account
Technical datasheet
Technical data
- Catalogue
- GN 114.7-16-110
- d1 -0.1
- 16
- l1 +0.4 Minimum size
- 110
- a
- 4.8
- b
- 1.2
- d2
- 18.7
- d3
- 15.9
- d4
- 22
- d5
- 58
- l2
- 14.2
- l3
- 34.5
- m
- 27
- Load capacity F in kN≈
double sided shearing resistance acc.
DIN 50141
(breaking strength) - 113
- 203
Pin
Steel
Zinc plated, blue passivated
Pawl
Stainless steel sheet metal AISI 304
T-handle
Plastic, polyamide (PA)
- Black
- Operating temperature up to +80 °C
- Bushing
- Stainless steel AISI 303
Push button / Slide
Plastic, polyacetal (POM)
- Push button: red
- Operating temperature up to +80 °C
Compression spring
Stainless steel AISI 302
Locking pins GN 114.7 with axial lock are used to quickly fix, connect and secure various components. Typically, they are used as bearing bolts that have to be frequently assembled and disassembled.
The rectangular pawls made of stainless steel sheet metal hold the locking pin in an axial position in the bore. They are retracted with the push button and when released, the compression spring returns them to the locked position. The pawls are not aligned with the T-handle.
The technical annex contains the load ratings for the double shear strength (breaking strength).
Information
The load capacities specified in the table for the double sided shearing resistance (breaking strength) have been calculated or theoretically defined on the basis of DIN 50141.
At the same time, the endangered bolt cross-section S, according to a nearby sketch, was considered in two shear planes before breakage.
The details given on load rating are non-binding guide values without any liability. In general, they do not constitute a warranty of condition.
The user must determine whether the product is suitable for the intended purpose. Environmental factors can influence the specified values.
An appropriate safety factor must be taken into account in the design.