Technical
datasheet
for welding
|
Catalogue
|
b
|
d
|
h1
|
h2
|
k1
|
k2
|
Nominal load
(WLL) |
Max. permitted
lashing force in daN (LC) |
|
|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
GN 589-100
|
100
|
35
|
41.5
|
57
|
16
|
30
|
1.6
|
3200
|
435
|
|
GN 589-137
|
137
|
50
|
59
|
80
|
23
|
41
|
3.2
|
6400
|
1100
|
|
GN 589-172
|
172
|
60
|
71.5
|
99
|
27
|
51
|
5
|
10000
|
2160
|
|
GN 589-228
|
228
|
80
|
95
|
130
|
38
|
70
|
10
|
20000
|
5260
|
Steel, German Material No. 1.6541
Lifting points GN 589 are distinguished for their very low dimensions. They provide high dynamic and static strength and can be load from any direction with approved safety (safety factor 4) for all loading directions.
The rated load carrying capacity listed in the above table is clearly marked on the lifting point. It applies to the most unfavourable load application of the load types listed opposite
Lifting points GN 589 comply with Mechanical Engineering Directive 2006 / 42 / EG.
| Method of mounting |  |  |  |  |  |  |  |  | ||
| Number | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 3 and 4 | 3 and 4 | 3 and 4 |
| Angles of inclination | 0° | 90° | 0° | 90° | 0° to 45 | 45° to 60° | asymm. | 0° to 45° | 45° to 60° | asymm. |
| Factor | 1 | 1 | 2 | 2 | 1.4 | 1 | 1 | 2.1 | 1.5 | 1 |
| b = 100 | 1.6 t | 1.6 t | 3.2 t | 3.2 t | 2.2 t | 1.6 t | 1.6 t | 3.4 t | 2.4 t | 1.6 t |
| b = 137 | 3.2 t | 3.2 t | 6.4 t | 6.4 t | 4.5 t | 3.2 t | 3.2 t | 6.8 t | 4.8 t | 3.2 t |
| b = 172 | 5.0 t | 5.0 t | 10.0 t | 10.0 t | 7.1 t | 5.0 t | 5.0 t | 10.6 t | 7.5 t | 5.0 t |
| b = 228 | 10.0 t | 10.0 t | 20.0 t | 20.0 t | 14.1 t | 10.0 t | 10.0 t | 21.2 t | 15.0 t | 10.0 t |
The above details refer to the maximum load in metric tonnes.
Carefully check the wear markings for the abrasion of the lifting point.
No traces of wear
Criteria reached:
Material worn down
to the wear marks
| Lifting point | Size fillet seam | Length | Volume in cm3 |
| b = 100 ( 1.6 t) | a = 4 | 251 | 4.016 |
| b = 137 ( 3.2 t) | a = 6 | 344 | 12.38 |
| b = 172 ( 5.0 t) | a = 7 | 431 | 21.10 |
| b = 228 ( 10.0 t) | a = 8 | 576 | 36.86 |
Welding must be made by an approved welder in accordance with EN 287-1.
The specified loading values are valid for an operating temperature of between -40 °C and + 200 °C. Load capacities under higher temperatures provided on request.
Operating instructions with more details and specifications are included with every delivery (see also www.elesa-ganter.com)
