Technical datasheet
GN 10b-SAluminium profielen
Profieltype Zwaar
b-Modulair systeem, met open sleuven aan alle zijden, Profieltype Licht / Zwaar
|
Code
|
s1
|
s2
|
n
|
Length l in m +1.5mm
|
Bundle
Pieces |
d1
|
d2
|
k
|
s3
|
t
|
Grid size
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GN 10b-454510S-N-2-4
|
45
|
45
|
10
|
2
|
4
|
10
|
-
|
-
|
6
|
12.5
|
45
|
16240
|
|
GN 10b-454510S-N-3-4
|
45
|
45
|
10
|
3
|
4
|
10
|
-
|
-
|
6
|
12.5
|
45
|
24360
|
* Bores only on grid size = 40
Profile types
- Type L: Light
- Type S: Heavy
Aluminum
Anodized, natural color N
Aluminum profiles GN 10b are produced by extrusion molding. They can be used, for example, to easily construct protective enclosures, workplace equipment or jigs.
Aluminum profiles in combination with the removable and reusable accessories form a flexible modular system. Attachments can be fastened to either the slots or the end faces via the holes.
The profile type light is typically used for small loads or for weight-optimized constructions.
Aluminum profiles are supplied in bundles. The table shows the quantity included in each bundle.
- T-Nuts GN 50b
- T-Slot Nuts GN 51b
- T-Slot Bolts GN 52b
- Cover Caps GN 60b
- Cover and Edging Profiles GN 70b
- Cover Profiles GN 71b
- Transport and Base Plates GN 80b
- Material: Al Mg Si 0.5 F25 (EN AW – 6063)
- Delivery condition: Artificially aged
- Anodized coating: E6EV1 (natural color), layer thickness: 10 μm
- Dimensional deviations as per DIN EN 12020-2
- Tensile strength Rm min. 245 N/mm²
- Yield point Rp0,2 min. 195 N/mm²
- Density 2.7 kg/dm³
- Linear expansion coefficient 23,6x10-6 1/k
- Modulus of elasticity E ≈ 70,000 N/mm²
- Hardness ≈ 75HB -2.5/187.5
| n | Grid size | Profile type | FN* in N | |||
| - | - | - | With T-nuts GN 50b | With T-slot nuts GN 51b | With T-slot bolts GN 52b | |
| - | - | - | Type V / F | Type S | - | - |
| 8 | 30 | Heavy | 2500 | 6000 | 3000 | 3500 |
| 10 | 40 | Light | 7500 | - | 5500 | 9000 |
| 10 | 45 | Light | 7500 | - | 5500 | 9000 |
| 10 | 45 | Heavy | 8500 | 17500 | 7500 | 9000 |
Wx, Wy = Axial resistance torque against bending
lx, ly = 2nd moment of area against bending
A = Cross-section area
m = Length-related mass
| GN 10b Profile type light | |||||||||
| s1 | s2 | n | Grid size | Bending axis x-x | Bending axis y-y | A | m ≈ | ||
| - | - | - | - | lx in cm4 | Wx in cm3 | ly in cm4 | Wy in cm3 | in cm2 | in kg/m |
| 40 | 40 | 10 | 40 | 9.06 | 4.53 | 9.06 | 4.53 | 5.61 | 1.51 |
| 40 | 80 | 10 | 40 | 63.2 | 15.8 | 17.2 | 8.61 | 9.86 | 2.67 |
| 45 | 45 | 10 | 45 | 11.7 | 4.89 | 11.7 | 4.89 | 5.73 | 1.55 |
| 45 | 90 | 10 | 45 | 81.8 | 18.2 | 23.5 | 10.5 | 11.3 | 3.05 |
| 80 | 80 | 10 | 40 | 132.6 | 33.2 | 132.6 | 33.2 | 18.5 | 4.98 |
| 90 | 90 | 10 | 45 | 210.5 | 46.8 | 210.5 | 46.8 | 23.5 | 6.34 |
| GN 10b Profile type heavy | |||||||||
| s1 | s2 | n | Grid size | Bending axis x-x | Bending axis y-y | A | m ≈ | ||
| - | - | - | - | lx in cm4 | Wx in cm3 | ly in cm4 | Wy in cm3 | in cm2 | in kg/m |
| 30 | 30 | 8 | 30 | 2.77 | 1.85 | 2.77 | 1.85 | 3.14 | 0.85 |
| 30 | 60 | 8 | 30 | 5.09 | 3.39 | 19.7 | 6.55 | 5.53 | 1.49 |
| 45 | 45 | 10 | 45 | 13.9 | 6.91 | 13.9 | 6.91 | 7.5 | 2.03 |
| 45 | 60 | 10 | 45 | 37.6 | 12.5 | 22.7 | 10.1 | 11.1 | 3.01 |
| 45 | 90 | 10 | 45 | 124.1 | 27.6 | 32.3 | 14.3 | 15.2 | 4.12 |
| 90 | 90 | 10 | 45 | 302.0 | 67.1 | 302.0 | 67.1 | 38.9 | 10.5 |
Gerelateerde producten
GN 21b
Centrale schroeven
Staal, voor aluminium profielen (b-modulair systeem)
GN 23b-R
Automatische connectoren
Staal, voor aluminium profielen (b-modulair systeem), Rechte of kopse aansluiting
GN 25b-A
Quick Release-connectoren
Staal, voor aluminium profielen (b-modulair systeem), Asymmetrische of symmetrische montagebout
GN 26b
Boutconnectoren
Staal, voor aluminium profielen (b-modulair systeem)