GN 666.7-KRoestvrijstalen beugelgrepen

Met plastic cover

Montage vanaf de kant van de operator

Technical datasheet

GN 666.7-K

Met plastic cover

GN 666.7-E

Met roestvrijstalen afdekkap

GN 666.7-K

Reset

Code	d₁	d₃	l₁ ±0.5	l₂ ±0.3 Threaded bore for mounting stud	d₄	h	l₃	l₄

GN 666.7-30-M8-200-K	30	M 8	200	200	20	60	265	15	520
GN 666.7-30-M8-250-K	30	M 8	250	250	20	60	315	15	550
GN 666.7-30-M8-300-K	30	M 8	300	300	20	60	365	15	580
GN 666.7-30-M8-400-K	30	M 8	400	400	20	60	465	15	740
GN 666.7-30-M8-500-K	30	M 8	500	500	20	60	565	15	800
GN 666.7-30-M8-600-K	30	M 8	600	600	20	60	665	15	860

Types

Type K: With plastic cover
Type E: With stainless steel cover cap

Handle tube

Stainless steel AISI 304, wall thickness 1,5 mm

Matte shiny finish, ground

Handle legs

Stainless steel AISI 304

Matte shiny finish, ground

Covers

Plastic, thermoplastic elastomer (TPE)

Black, matte finish for type K

Stainless steel AISI 304 for type E

Fastening set

Stainless steel AISI 304

Mounting stud with threaded pin DIN 913-M8

Grub screw DIN 914-M5

For a mounting of tubular handles GN 666.7 (mounting from operator‘s side) the stud is first screwed in from the machine side with the threaded pin DIN 913-M8x25 (included) and then the handle is pushed on and secured with the grub screw DIN 914-M5.

Type E of tubular handles GN 666.7 is completely made of A2 stainless steel.

Special lengths

Example of application

Tubular handles GN 666.7 allow the mounting of a pair of handles in opposite position. This method could be used on doors (double handle).

Generally a modification of the thread length l₄ is required for this. The included threaded pin DIN 913-M8x25-A2 of the mounting stud needs to be replaced by longer threaded pin, too.

Handles with a modified thread length l₄ are available on request.

Gerelateerde producten