GN 215Indexeringshendels

Indexeringshendels

Staal

Technical datasheet

GN 215

Zurücksetzen

Katalog	d₁	d₂ H7	d₃	d₄	d₅	h₁	h₂	h₃ max.	k	Length l	w +0.5°

GN 215-54-K10-A	54	K 10	32	5.2	44.5	37	13	16.5	30	122	22°	460
GN 215-54-K12-A	54	K 12	32	5.2	44.5	37	13	16.5	30	122	22°	466
GN 215-60-K14-A	60	K 14	32	5.2	50	39	15	18.5	36	125	19°	619
GN 215-60-K16-A	60	K 16	32	5.2	50	39	15	18.5	36	125	19°	597
GN 215-54-K10-B	54	K 10	32	5.2	44.5	37	13	16.5	30	122	22°	461
GN 215-54-K12-B	54	K 12	32	5.2	44.5	37	13	16.5	30	122	22°	440
GN 215-60-K14-B	60	K 14	32	5.2	50	39	15	18.5	36	125	19°	580
GN 215-60-K16-B	60	K 16	32	5.2	50	39	15	18.5	36	125	19°	580

Types

Type A: Without serrations
Type B: With gear rim (30 serrations)

Lever

Steel

Blackened

Keyway

Tolerance slot width P9

Bore K 10: DIN 6885-1

Bore K 12 ... K 16: DIN 6885-2

Cover

Plastic

Black

with affixed PVC cover disk in light grey

Ball knob DIN 319

Plastic, phenolic resin (PF)

Black, shiny finish

With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control).

Limiting the indexing angle can be achieved with two dowels (sketch).

The bushing is connected to the shaft via keyway.

The location flange is bolted to the machine with two socket head cap screws (M 5).

The lever, via the location pin, provides the connection between shaft and location flange.

The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.

Serrations, restricted angle to drawing

The location pin is a wedge-type as standard, which guarantees backlash-free positioning and also achieving easy engagement and disengagement.

If backlash-free positioning is not required, a dowel pin (made from a grub screw DIN 915-M6x14) can be used. The serrations can be made square or with dowels and suitable holes. Such holes have to be made large enough to ensure that the dowel is not restricted on engagement (lever swivel radius).

Smallest available angle for special serrations:

11º for size 54

9º for size 60

Smaller angles can be acheived with suitable serrations and dowels.

Verwandte Produkte