GN 3380Sensor

Sensor

for Pneumatically Operated Clamps / Pneumatically Operated Cylinders

GN 3380

Catalogue
Cable length l in m
d
GN 3380-T-S-0,3
0.3
3
14

Type

  • Type T: for T-groove cylinder

Connection type

  • Connection type S: Plug

Housing

Plastic

Cable (outer sheath)

Polyurethan PUR

Black

Plug

Plastic, 3-pole

Knurled screw connection

  • Brass, nickel plated
  • Freely rotating

Temperature range: -30 °C to +80 °C

Protection class IP 65, IP 67

The sensor GN 3380 detects the piston position of pneumatic cylinders with magnetic pistons. Cylinders installed in pneumatic clamps enable the position detection of the clamp itself by means of this sensor. Upon reaching the switch point, the sensor electronics deliver a high signal, for instance to a machine controller, and also indicate this switch state via the integrated LED.

For installation, the sensor is inserted into the cylinder groove from above. The side retaining ribs prevent it from falling out. A quarter turn of the fastening screw quickly and reliably locks the sensor into place in the groove.

Electrical properties
Output functionNormally open (NO)____logo__3380_SB-29359-0__
Output typePNP
Supply voltage10 - 30 V DC
Continuous current Ia≤ 100 mA
Connection type3-pole plug M8x1,with knurled screw connection, with PUR cable 0.3 m____logo__3380_SB-30184-0__
Plug (S)
Switching frequency1000 Hz
Power consumption≤ 8 mA
Voltage drop≤ 2 V
Protection classIII
Response sensitivity3 mT
Overrun distance10 mm
Hysteresis< 0.8 mT
Repeatability≤ 0.1 mT
Shock and vibration resistance30 g, 11 ms / 10 ... 55 Hz, 1 mm
EMCAccording to EN 60947-5-2
Switch state LEDYes
Reverse polarity protectionYes
Short-circuit protectionYes
Approvals, conformity declarations CE marking UL____logo__ce-cuslist__
Related products
Forked clamping arm, with two flanged washers

GN 860-AP

Pneumatic Toggle Clamps with Horizontal Mounting Base
Toggle Clamps

GN 861

Toggle Clamps Steel, Pneumatic, Heavy Duty
Toggle Clamps

GN 863

Toggle Clamps Steel, Pneumatic, Heavy Duty