GN 2280Bull´s eye levels

Bull´s eye levels

adjustable

GN 2280

Catalogue
d1
d2
d3
d4
h1
h2
t
GN 2280-ALN-17-K-30
17
12
13.2
M 3
13
14.7
5
6
GN 2280-ALN-20-K-30
20
14
13
M 3
14.5
17
5
8
GN 2280-ALN-24-K-30
24
16
15
M 3
17
20
5
12

Sensitivity

Type 30: Angle minutes, bubble move by 2mm

Housing

Aluminium

anodized, natural colour ALN

anodized, black ALS

Spirit level element

Glass plastic body

Filling

coulourless-transparent K

Casting compound

mineral-based

Bull´s eye levels GN 2280 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.

The mounting threads offset by 120° allow the spirit levels to be aligned in relation to the mounting surface. An alignment ball at the bottom surface of the adjustment plate serves as tilting point. Specific tightening torques of the bolts allow to be achieved, so that the bubble is located inside the marking ring once the horizontal alignment is reached.

  • Filling, green-transparent
  • Other sensitivities
  • Housing in brass or Stainless Steel

Definition of terms

A spirit level is hollow body filled with a fluid and a gas bubble which is used to check the horizontal position of an object. The position of the gas bubble in the fluid shows the angle and the direction at which the object is inclined in relation to the horizontal level.

The function

The hollow body containing the fluid and the gas bubble has a defined radius at its topic side, causing the gas bubble to float by its buoyancy always to the highest point.

The transparent upper section normally carries markings or a circle centric to the biddle position. If the gas bubble is centered precisely inside the merking and if the air level is properly adjusted, the object to be checked is in the horizontal position.

 

Types of spirit levels

Spirit levels are available as bull´s eye levels or screw-on levels.

Bull´s eye levels simultaneously measure the angle of inclination and the angular position, e.g. of a certain level, whereas screw-on levels indicate the angle of inclination in one dimension only along the axis of the level.

Sensitivity

The sensitivity of spirit levels is given as angle of inclination, e.g. 30 angular minutes or 0.5 degrees. This is the angle of inclination by which the spirit level must be tilted to make the bubble move by 2 mm. A spirit level with a sensitivity of 6 angular minutes therefore has a higher sensitivity than a spirit level with a sensitivity of 30 angular minutes.

 

Angle of inclination and difference in altitude

Sensitivity is sometimes also given in millimetre per metre, i.e. as difference in altitude per unit of the length. See also the reference table opposite.

Difference in altitudeAngle w-
in milimetre per metrein angular minutesDegree, decimal
0.310.0167
0.930.0500
1.760.1000
2.9100.1667
5.8200.3333
8.7300.5000
11.6400.6667
14.5500.8333
17.5601.0000
Related products
Bull´s eye levels

GN 2277

Bull´s eye levels with mounting flange
Adjustment plates

GN 2277.1

Adjustment plates for bull´s eye levels GN 2277
Bull´s eye levels

GN 2278

Bull´s eye levels for insertion into bore holes
Bull´s eye levels

GN 2279

Bull´s eye levels for surface mounting
Bull´s eye levels

GN 2281

Bull´s eye levels for installation in plates and housings
Screw-on levels

GN 2282

Screw-on levels for mounting with screws