GN 2276-AVCross spirit levels

aligned, mounting from the front side (not adjustable)

for mounting with screws

GN 2276-AV

Catalogue
d1
d2
d3
d4
h1
h2
m1
m2
m3
GN 2276-ALN-62-G-6-AV
62
3.4
6.3
52
13
9.8
18.4
6.7
25.1
95
GN 2276-ALN-62-G-50-AV
62
3.4
6.3
52
13
9.8
18.4
6.7
25.1
95

Sensitivity

  • 6: Angle minutes, bubble move by 2 mm
  • 50: Angle minutes, bubble move by 2 mm

Types

  • Type AV: aligned, mounting from the front side (not adjustable)
  • Type JV: adjustable, mounting from the front side

Housing

Aluminum

anodized, natural color ALN

anodized, black ALS

Spirit level element

Glass body

Filling

green-transparent G

Casting compound

mineral-based

Cross spirit levels GN 2276 are used to check the horizontal position of jigs, machines, devices, appliances and instruments.

The spirit levels of type AV are aligned in relation to the reference surface so that the bubbles are centered in the middle of the marking lines once the horizontal position of the contact surface is reached.

The spirit levels of type JV are aligned using the fastening holes that are offset by 120°.

An alignment ball on the bottom serves as a pivot point. With careful tightening, it is possible to achieve an alignment that places the bubbles between the middle marking lines.

  • Filling, colorless-transparent
  • Other sensitivities

Definition of terms

A spirit level is hollow body filled with a fluid and a gas bubble which is used to check the horizontal position of an object. The position of the gas bubble in the fluid shows the angle and the direction at which the object is inclined in relation to the horizontal level.

The function

The hollow body containing the fluid and the gas bubble has a defined radius at its topic side, causing the gas bubble to float by its buoyancy always to the highest point.

The transparent upper section normally carries markings or a circle centric to the biddle position. If the gas bubble is centered precisely inside the merking and if the air level is properly adjusted, the object to be checked is in the horizontal position.

 

Types of spirit levels

Spirit levels are available as bull´s eye levels or screw-on levels.

Bull´s eye levels simultaneously measure the angle of inclination and the angular position, e.g. of a certain level, whereas screw-on levels indicate the angle of inclination in one dimension only along the axis of the level.

Sensitivity

The sensitivity of spirit levels is given as angle of inclination, e.g. 30 angular minutes or 0.5 degrees. This is the angle of inclination by which the spirit level must be tilted to make the bubble move by 2 mm. A spirit level with a sensitivity of 6 angular minutes therefore has a higher sensitivity than a spirit level with a sensitivity of 30 angular minutes.

 

Angle of inclination and difference in altitude

Sensitivity is sometimes also given in millimetre per metre, i.e. as difference in altitude per unit of the length. See also the reference table opposite.

Difference in altitudeAngle w-
in milimetre per metrein angular minutesDegree, decimal
0.310.0167
0.930.0500
1.760.1000
2.9100.1667
5.8200.3333
8.7300.5000
11.6400.6667
14.5500.8333
17.5601.0000
Related products
Bull´s eye levels

GN 2277

Bull´s eye levels with mounting flange
Bull´s eye levels

GN 2278

Bull´s eye levels for insertion into bore holes
Bull´s eye levels

GN 2279

Bull´s eye levels for surface mounting
Bull´s eye levels

GN 2280

Bull´s eye levels adjustable
Screw-on levels

GN 2282

Screw-on levels for mounting with screws
aligned, mounting from front side (not adjustable)

GN 2283-AV

Screw-on levels for mounting with screws