GN 215Indexing Levers

Indexing Levers

GN 215

Catalogue
d1
d2 H7
d3
d4
d5
h1
h2
h3 max.
k
l
w +0.5°
GN 215-54-K10-A
54
K 10
32
5.2
44.5
37
13
16.5
30
122
22°
480
GN 215-54-K12-A
54
K 12
32
5.2
44.5
37
13
16.5
30
122
22°
466
GN 215-60-K14-A
60
K 14
32
5.2
50
39
15
18.5
36
125
19°
619
GN 215-60-K16-A
60
K 16
32
5.2
50
39
15
18.5
36
125
19°
597
GN 215-54-K10-B
54
K 10
32
5.2
44.5
37
13
16.5
30
122
22°
461
GN 215-54-K12-B
54
K 12
32
5.2
44.5
37
13
16.5
30
122
22°
440
GN 215-60-K14-B
60
K 14
32
5.2
50
39
15
18.5
36
125
19°
600
GN 215-60-K16-B
60
K 16
32
5.2
50
39
15
18.5
36
125
19°
580

Types

  • Type A: Without serrations
  • Type B: With 30 serrations

Steel

Blackened

Cover

Plastic

Black, with affixed PVC cover disk in light grey

Keyway for bore

K10: 3 P9 x 1.1

K12 ... K16: DIN 6885/2

Ball knob DIN 319 

Plastic, Duroplast

Black, shiny finish

With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control).

Limiting the indexing angle can be achieved with two dowels (see sketch).

The bushing is connected to the shaft via parallel key / keyway.

The location flange is bolted to the machine with two screws (M 5).

The lever, via the location pin, provides the connection between shaft and location flange.

The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.

  • Serrations, restricted angle to drawing
 
 

The location pin is a wedge-type as standard, which guarantees backlash-free positioning and also achieving easy engagement and disengagement.

If backlash-free positioning is not required, a dowel pin (made from a grub screw DIN 915-M6x14) can be used. The serrations can be made square or with dowels and suitable holes. Such holes have to be made large enough to ensure that the dowel is not restricted on engagement (lever swivel radius).

Smallest available angle for special serrations:

11° for size 54

9° for size 60

Smaller angles can be acheived with suitable serrations and dowels.

Related products
Black-oxide steel boss, cap in the Ergostyle colours

ELC.

Control levers arranged for clicking operation, technopolymer
Control lever

ELCR.

Control lever arranged for clicking operation, technopolymer
Indexing cranked handles

GN 558

Indexing cranked handles Cast iron
Adjustable knobs

GN 700

Adjustable knobs with stepless positioning
Knurled Control knobs

GN 723.4

Knurled Control knobs Aluminium
Knurled Control knobs

GN 726.2

Knurled Control knobs Aluminum
Control levers

GN 750

Control levers Steel, blackened
With black-oxide steel boss, plain hole

LBR-A

Control levers arranged for clicking operation, technopolymer
Black-oxide steel plunger, without locking nut

PMT.100-A

Indexing plungers SUPER-technopolymer body