with cam latch
Catalogue
|
Clamping range A
|
Clamping range |
|
---|---|---|---|
|
|
|
|
GN 119.3-DK-A1-SR
|
A 1 (l=35)
|
17 - 25
|
424
|
GN 119.3-DK-A1-SW
|
A 1 (l=35)
|
17 - 25
|
419
|
GN 119.3-DK-A2-SR
|
A 2 (l=40)
|
22 - 30
|
431
|
GN 119.3-DK-A2-SW
|
A 2 (l=40)
|
22 - 30
|
431
|
GN 119.3-DK-A3-SR
|
A 3 (l=45)
|
27 - 35
|
441
|
GN 119.3-DK-A3-SW
|
A 3 (l=45)
|
27 - 35
|
441
|
GN 119.3-DK-A4-SR
|
A 4 (l=50)
|
32 - 40
|
451
|
GN 119.3-DK-A4-SW
|
A 4 (l=50)
|
32 - 40
|
453
|
GN 119.3-DK-A5-SR
|
A 5 (l=55)
|
37 - 45
|
463
|
GN 119.3-DK-A5-SW
|
A 5 (l=55)
|
37 - 45
|
465
|
GN 119.3-DK-A6-SR
|
A 6 (l=60)
|
42 - 50
|
472
|
GN 119.3-DK-A6-SW
|
A 6 (l=60)
|
42 - 50
|
473
|
GN 119.3-DK-A7-SR
|
A 7 (l=65)
|
47 - 55
|
484
|
GN 119.3-DK-A7-SW
|
A 7 (l=65)
|
47 - 55
|
485
|
GN 119.3-DK-A8-SR
|
A 8 (l=70)
|
52 - 60
|
494
|
GN 119.3-DK-A8-SW
|
A 8 (l=70)
|
52 - 60
|
496
|
GN 119.3-DK-A9-SR
|
A 9 (l=75)
|
57 - 65
|
496
|
GN 119.3-DK-A9-SW
|
A 9 (l=75)
|
57 - 65
|
480
|
Cabinet 'U' handle
Zinc die casting
plastic coated
black, RAL 9005, textured finish SW
silver, RAL 9006, textured finish SR
Cam latch
Sheet Steel
zinc plated, blue passivated
Distance piece
Aluminium
other parts
Steel
zinc plated, blue passivated
Latches with cabinet 'U' handle GN 119.3 are used when the application requires both a locking mechanism and a handle.
The cabinet 'U' handle with integrated lock is an attractively designed and cost-effective solution.
Latches GN 119.3 have a pulling-in range of 10 mm. Locking is achieved by turning the latch clockwise.
By turning the latch clockwise the stepped cam latch moves up behind the door frame and pulls the door in.
The large pulling-in range of the cam (10 mm) allows these locks to be used successfully on doors with sealing strips. When selecting clamping range ‚A‘ the thickness of the door seal might have to be taken into consideration.
To fit the lock, the door will have to be provided with two holes as per sketch shown at a distance from the door frame to hole center of 23 mm.
The spigot (M22x1.5) has 4 surfaces, allowing the cabinet 'U' handle also to be used with the standard bore holes of door latches GN 119.
The lock housing with the preassembled operating bolt is fitted into the hole from the front and held in position with the hexagon nut. The distance piece and the cam latch are then fitted at the rear and fixed with the hexagon nut.