GN 119.3Latches with cabinet 'U' handle

Latches with cabinet 'U' handle

with cam latch

GN 119.3

Catalogue
Clamping range A

Clamping range
GN 119.3-DK-A1-SR
A 1 (l=35)
17 - 25
424
GN 119.3-DK-A1-SW
A 1 (l=35)
17 - 25
419
GN 119.3-DK-A2-SR
A 2 (l=40)
22 - 30
431
GN 119.3-DK-A2-SW
A 2 (l=40)
22 - 30
431
GN 119.3-DK-A3-SR
A 3 (l=45)
27 - 35
441
GN 119.3-DK-A3-SW
A 3 (l=45)
27 - 35
441
GN 119.3-DK-A4-SR
A 4 (l=50)
32 - 40
451
GN 119.3-DK-A4-SW
A 4 (l=50)
32 - 40
453
GN 119.3-DK-A5-SR
A 5 (l=55)
37 - 45
463
GN 119.3-DK-A5-SW
A 5 (l=55)
37 - 45
465
GN 119.3-DK-A6-SR
A 6 (l=60)
42 - 50
472
GN 119.3-DK-A6-SW
A 6 (l=60)
42 - 50
473
GN 119.3-DK-A7-SR
A 7 (l=65)
47 - 55
484
GN 119.3-DK-A7-SW
A 7 (l=65)
47 - 55
485
GN 119.3-DK-A8-SR
A 8 (l=70)
52 - 60
494
GN 119.3-DK-A8-SW
A 8 (l=70)
52 - 60
496
GN 119.3-DK-A9-SR
A 9 (l=75)
57 - 65
496
GN 119.3-DK-A9-SW
A 9 (l=75)
57 - 65
480
GN 119.3_esec-note

Types

  • Type DK: Operation with triangular spindle (DK7)
  • Type VK7: Operation with square spindle A/F7
  • Type VK8: Operation with square spindle A/F8
  • Type VDE: Operation with double bit

Cabinet 'U' handle

Zinc die casting

plastic coated

black, RAL 9005, textured finish SW

silver, RAL 9006, textured finish SR

Cam latch

Sheet Steel

zinc plated, blue passivated

Distance piece

Aluminium

other parts

Steel

zinc plated, blue passivated

Latches with cabinet 'U' handle GN 119.3 are used when the application requires both a locking mechanism and a handle.

The cabinet 'U' handle with integrated lock is an attractively designed and cost-effective solution.

Latches GN 119.3 have a pulling-in range of 10 mm. Locking is achieved by turning the latch clockwise.

 

By turning the latch clockwise the stepped cam latch moves up behind the door frame and pulls the door in.

The large pulling-in range of the cam (10 mm) allows these locks to be used successfully on doors with sealing strips. When selecting clamping range ‚A‘ the thickness of the door seal might have to be taken into consideration.

To fit the lock, the door will have to be provided with two holes as per sketch shown at a distance from the door frame to hole center of 23 mm.

The spigot (M22x1.5) has 4 surfaces, allowing the cabinet 'U' handle also to be used with the standard bore holes of door latches GN 119.

The lock housing with the preassembled operating bolt is fitted into the hole from the front and held in position with the hexagon nut. The distance piece and the cam latch are then fitted at the rear and fixed with the hexagon nut.

Related products
Lever latches with T-Handle

CSMT.

Lever latches with T-Handle Operation with key, technopolymer
Rotary clamping latches

GN 116.1

Rotary clamping latches
Steel

GN 119

Latches Steel / Stainless Steel
Socket keys

GN 119.2

Socket keys for latches
Rotary clamping latches

GN 516.1

Rotary clamping latches Latch distance A continuously adjustable
Lock with different combinations

VC.308

Lever latches Technopolymer knob with lock
Lock with different combinations

VC.309

Lever latches Technopolymer knob with lock