With O-Ring and retaining chain, technopolymer
Catalogue
|
Description
|
d
|
h
|
s
|
D
|
L
|
R
|
|
---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
158217
|
THR.1/2-LP
|
G 1/2
|
11
|
4
|
32
|
29
|
26
|
15
|
158218
|
THR.3/4-LP
|
G 3/4
|
12
|
5
|
37
|
32.5
|
28.5
|
23
|
158219
|
THR.1-LP
|
G 1
|
13
|
6
|
44
|
36
|
32
|
30
|
Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
Elastic fork in acetal based technopolymer (POM), black colour.
NBR synthetic rubber O-Ring.
In addition to guaranteeing the OR-ring retention, the seat for the housing allows an optimal seal even with minimum tightening torques.
Ball cable and coupling heads in acetal resin based (POM) technopolymer, black colour.
NERINOX treated stainless steel ring with two coils.
Head fastening by means of a self-tapping screw ø4.8 mm UNI EN ISO 7050 or a M5 countersunk-head screw UNI EN ISO 10642.
60°C
Suitable for use when it is necessary to avoid the loss of the cap.
The elastic fork, housed in the special groove of the cap, can rotate freely.
The spiral ring connects the elastic retaining fork to the chain.
In laboratory tests carried out with mineral oil type CB68 (according to ISO 3498) at 23°C for a limited period of time, the values of pressure resistance were much higher than 100 bar.
In any case, we suggest to check the suitability of the product with regard to the fluid nature, operating temperature and application type under the actual working conditions.