Technopolymer
Catalogue
|
Description
|
R
|
d
|
D
|
h
|
h1 max
|
h2
|
d1
|
d3
|
l1
|
x
|
max force unit 2
|
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
33321
|
LAC.44-B-M5
|
44
|
M5
|
17.5
|
18
|
20.5
|
5.5
|
6.1
|
9
|
18
|
0.5
|
3500
|
33422
|
LAC.44-B-M6
|
44
|
M6
|
17.5
|
18
|
20.5
|
5.5
|
6.1
|
9
|
18
|
0.5
|
3500
|
33483
|
LAC.63-B-M5
|
63
|
M5
|
17.5
|
18
|
20.5
|
5.5
|
6.1
|
9
|
18
|
0.75
|
4000
|
33482
|
LAC.63-B-M6
|
63
|
M6
|
17.5
|
18
|
20.5
|
5.5
|
6.1
|
9
|
18
|
0.75
|
4000
|
33561
|
LAC.80-B-M6
|
79
|
M6
|
20
|
21
|
25.5
|
7
|
8.1
|
11
|
20
|
1
|
7000
|
33562
|
LAC.80-B-M8
|
79
|
M8
|
20
|
21
|
25.5
|
7
|
8.1
|
11
|
20
|
1
|
7000
|
Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
Glossy zinc-plated steel or AISI 303 stainless steel, with threaded hole or threaded stud.
Polyamide based (PA) technopolymer, black colour.
Polyamide-based SUPER-technopolymer (PA), black colour.
Polyamide-based SUPER-technopolymer (PA), black colour.
Cam lever is a device which allows a quick and secure clamping.
The LAC-R model with adjustable ring-nut (ELESA patent) offers quick and secure clamping. The knurled ring-nut on the base allows to adjust the clamping force applied while locking the lever in the desired position.
Cam clamps with connection element, not drilled for a better cleaning (for sufficient quantities).
LAC-B, LAC-SST, LAC-B-R and LAC-SST-R with threaded hole. The screw where the cam lever is mounted must protrude from the assembly surface by a maximum length of h1 max from the end-stop as shown in table and Fig.1. The user will notice the h1 max value is reached as the screw rests on the end-stop in the connecting element.
Fine adjustment: rotate clockwise or anti-clockwise the knurled adjustable ring-nut to calibrate the clamping force and put the lever in the desired position. The ring-nut is marked with minimum and maximum adjustment values: half a turn is enough for adjustment.
Clamping: lower the lever whose fulcrum is an eccentric cam which controls the adjusting base by rotating.