Technical datasheet
GN 23i-RAutomatic Connectors
Right-angled connection
Steel, for Aluminum Profiles (i-Modular System), Right-Angled Connection with Single or Double T-Nut, or End Face Connection
GN 23i-R
|
Catalogue
|
n
|
Bundle
Pieces |
d1 Self-forming thread
|
d2
|
h
|
l1
|
l2
|
l3
|
A/F 1
|
A/F 2
|
Tightening torque
in Nm |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GN 23i-6S-R-SZ-4
|
6
|
4
|
S 10
|
M 5
|
6
|
32
|
-
|
12
|
4
|
5
|
8
|
72
|
|
GN 23i-8S-R-SZ-4
|
8
|
4
|
S 12
|
M 6
|
7
|
34.5
|
2.5
|
16
|
5
|
6
|
14
|
140
|
Profile type
Profile type
- Type S: Heavy
Coding
Coding
- R: Right-angled connection
- D: With 2 screws and double T-nut
- S: End face connection
Steel
Steel
Zinc plated, blue passivated SZ
Automatic connectors GN 23i (Coding R) fasten aluminum profiles together at right angles. Machining of the profile is not necessary. The connection can be freely positioned and slid along the slot.
Automatic connectors GN 23i (Coding D) fasten aluminum profiles together at right angles and secure them against twisting. Machining of the profile is not necessary. The connection can be freely positioned and slid along the slot.
Automatic connectors GN 23i (Coding S) fasten aluminum profiles together on the end faces to extend them while securing them against twisting. Machining of the profile is not necessary.
For assembly, first insert the socket cap screw along the slot and then screw in the lightly lubricated threaded bushings. Minor burr formation is possible. Automatic connectors are used in pairs opposite each other. If panels are used in the slot, they must be suitably pocketed.
Automatic connectors are supplied in bundles. The table shows the quantity included in each bundle.
Related products
GN 10i-L-N
Aluminum Profiles
i-Modular System, with Open Slots on All Sides, Profile Type Light / Heavy
GN 11i
Aluminum Profiles
i-Modular System, with Partially Closed Slots, Profile Type Light